Manufacturing Process of Copper

Manufacturing Process of Copper explained by professional Forex trading experts the “ForexSQ” FX trading team. 

Manufacturing Process of Copper

Copper is typically extracted from oxide and sulfide ores that contain between 0.5 and 2.0 percent copper.

The refining techniques employed by copper producers depend on the ore type, as well as other economic and environmental factors. Currently, about 80 percent of global copper production is extracted from sulfide sources.

Regardless of the ore type, mined copper ore must first be concentrated to remove gangue, unwanted materials embedded in the ore.

The first step in this process is crushing and powderizing ore in a ball or rod mill.

Sulfide Ores

Virtually all sulfide-type copper ores, including chalcocite (Cu2S), chalcopyrite (CuFeS2) and covellite (CuS), are treated by smelting.

After crushing the ore to a fine powder, it is then concentrated by froth flotation, which requires mixing the powdered ore with reagents that combine with the copper to make it hydrophobic. The mixture is then bathed in water along with a foaming agent, which encourages frothing.

Jets of air are shot up through the water forming bubbles that float the water repellent copper particles to the surface. The froth, which contains about 30 percent copper, 27 percent iron and 33 percent sulfur, is skimmed off and taken for roasting.

If economical, lesser impurities that may be present in the ore, such molybdenum, lead, gold and silver, can also be processed and removed at this time through selective flotation.

At temperatures between 932-1292°F (500-700°C), much of the sulfur content remaining is burned off as sulfide gas, resulting in a calcine mix of copper oxides and sulfides.

Fluxes are added to the calcine copper, which is now about 60 percent pure, before it is heated again, this time to 2192°F (1200C°C).

At this temperature, the silica and limestone fluxes combine with unwanted compounds, such as ferrous oxide, and bring them to the surface to be removed as slag. The remaining mixture is a molten copper sulfide referred to as ‘matte’.

The next step in the refining process is to oxidize liquid matte in order to remove iron and, again, to burn off sulfide content as sulfur dioxide. The result is 97-99 percent blister copper. The term ‘blister copper’ comes from the bubbles produced by sulfur dioxide on the surface of the copper.

In order to produce market grade copper cathodes, blister copper must first be cast into anodes and treated electrolytically. Immersed in a tank of copper sulfate and sulphuric acid, along with a pure copper cathode starter sheet, the blister copper becomes the anode in a galvanic cell. Stainless steel cathode blanks are also used at some refineries, such as Rio Tinto’s Kennecott Copper Mine in Utah.

As a current is introduced, copper ions begin to migrate to the cathode, or starter sheet, forming 99.9-99.99% pure copper cathodes.

Oxide Ore Processing and SX/EW

After crushing oxide-type copper ores, such as azurite (2CuCO3 · Cu(OH)3), brochantite (CuSO4), chrysocolla (CuSiO3 · 2H2O) and cuprite (Cu2O), dilute sulfuric acid is applied to the surface of the material on leaching pads or in leaching tanks.

As the acid trickles through the ore, it combines with the copper, producing a weak copper sulfate solution.

The so-called ‘pregnant’ leach solution (or pregnant liquor) is then processed using a hydrometallurgical process known as solvent extraction and electro-winning (or SX-EW).

Solvent extraction involves stripping the copper from the pregnant liquor using an organic solvent, or extractant. During this reaction, copper ions are exchanged for hydrogen ions, allowing the acid solution to be recovered and re-used in the leaching process.

The copper-rich aqueous solution is then transferred to an electrolytic tank where the electro-winning part of the process occurs. Under electrical charge, copper ions migrate from the solution to copper starter cathodes that are made from high purity copper foil.

Other elements that may be present in the solution, such as gold, silver, platinum, selenium and tellurium, collect in the bottom of the tank as ‘slimes’ and can be recovered through further processing.

Electro-won copper cathodes are of equal or greater purity than those produced by traditional smelting, but require only one-quarter to one-third the amount of energy per unit of production.

The development of SX-EW has allowed copper extraction in areas where sulfuric acid is not available or cannot be produced from sulfur within the copper ore body, as well as from old sulfide minerals that have been oxidized by exposure to air or bacterial leaching and other waste materials that would have previously been disposed of un-processed.

Copper can alternatively be precipitated out of the pregnant solution via cementation using scrap iron. However, this produces a less pure copper than SX-EW and, so, is less often employed.

In-Situ Leaching (ISL)

In-situ leaching has also been used to recover copper from suitable areas of ore deposits.

This process involves drilling boreholes and pumping a leachate solution – usually sulfuric or hydrochloric acid – into the ore body. The leachate dissolves copper minerals before it is recovered via a second borehole. Further refining using SX-EW or chemical precipitation produces marketable copper cathodes.

ISL is often conducted on low-grade copper ore in backfilled stopes (also known as stope leaching) ore in caved areas of underground mines.

The copper ores most amenable to ISL include the copper carbonates malachite and azurite, as well as tenorite and chrysocolla.

Global mine production of copper is estimated by the US Geological Survey to have reached 16.1 million metric tonnes in 2011. The primary source of copper is Chile, which produces approximately one-third of total world supply. Other large producers include the US, China, and Peru.

Due to the high value of pure copper, a large portion of copper production now comes from recycled sources. In the US, recycled copper accounts for about 32 percent of annual supply. Globally, this number is estimated to be closer to 20 percent.

The largest corporate producer of copper worldwide is the Chilean state enterprise Codelco. Codelco produced 1.76 million metric tonnes of refined copper in 2010, or about 11% of total global production. Other large producers include Freeport-McMoran Copper & Gold Inc., BHP Billiton Ltd., and Xstrata Plc.

Sources Copper – A Vital Element. Copper Mining.
Wikipedia. Copper Extraction Techniques.
Copper Development Association. Production.

Manufacturing Process of Copper Conclusion

For more information about currency trading brokers visit Forex brokers comparison website, Tip foreign exchange trading experts please by share this article about Manufacturing Process of Copper.

In this article